Essential Organic Mattress Assembly Instructions

Before You Begin:

  • For Queen, King, and Cal. King sizes, you will have 2 separate latex pieces per layer (4 in total).
  • For Twin, Twin XL, and Double sizes, there is 1 piece per layer (2 in total).
  • Each latex layer has a fabric cover with the firmness labeled directly on it for easy identification.

Step-by-Step Assembly

  1. Lay the mattress cover on your foundation or solid slatted base.
    - Ensure that the open end of the cover is positioned at the head of the bed.
    - The canvas diamond-patterned fabric should face downward (this is the bottom).
    - The Obasan logo should be visible on the left side at the foot of the bed.

  2. Pull the corners of the cover down tightly over your foundation or base. If you’re using a slatted base, make sure the cover is evenly stretched out and ready to receive the latex layers.

  3. Identify the 4” firm base layer (the firmness is written directly on the fabric cover).
    - Place the firm base layer inside the mattress cover, ensuring it fits snugly into each corner.
    - For larger sizes (Queen, King, Cal. King), place one piece on each side.

  4. Next, locate the 4” medium firmness core layer (labeled on the fabric).
    - Place this layer directly on top of the firm base layer, carefully aligning the corners and edges.
    - Again, for larger sizes, install each side separately according to the firmness labels.

  5. Once both layers are placed and aligned, pull the side panels of the mattress cover up and over the latex layers.

  6. Ensure all layers are squared inside the cover, fitting tightly into each corner.

  7. Finally, pull the top panel of the cover over the mattress and begin zipping it closed.
    - Zip around the bed slowly, pulling the cover downward slightly as you zip to avoid stressing the zipper.

Tip:

If needed, adjust the layers as you go to keep everything aligned and squared inside the cover.